Reports

A report is a plain text file that records what one job did. It is for the person who must answer, weeks later, what happened to a media source.

Save one

1. Select a job that has ended.
2. Click Save Report…, or press Ctrl+S.
3. Choose where to put the file.

The suggested name is <folder name>-report.txt.

The button works only for a job that has finished, failed or was cancelled. A running job has no result to report.

What it holds

MediaCopy 3000 report
Job: offload
Source: /media/CARD_A001
Destination: /Volumes/Shuttle-01/2026-09-12
Destination: /Volumes/Archive-A/2026-09-12
Created: 2026-09-12T14:03:00+00:00
Plan
  files: 7
  bytes: 17260697327
  originals: the seal this job takes first
  seal first: 7 files, 17260697327 bytes, on failure: stop before copying
  generation: /Volumes/Shuttle-01/2026-09-12 (3, 0003_CARD_A001_2026-09-12_140300.mhl)
  generation: /Volumes/Archive-A/2026-09-12 (1, 0001_CARD_A001_2026-09-12_140300.mhl)
  target: /Volumes/Shuttle-01/2026-09-12 (empty)
  target: /Volumes/Archive-A/2026-09-12 (will be created)
  warning: folder is already sealed – generation 2
Result: finished, all files verified
Files: 7 total, 7 verified, 0 hash mismatch/io error, 0 missing, 0 new, 0 replaced
Bytes: 17260697327
Manifest: /Volumes/Shuttle-01/2026-09-12/CARD_A001/ascmhl/0003_CARD_A001_2026-09-12_140300.mhl
Manifest: /Volumes/Archive-A/2026-09-12/CARD_A001/ascmhl/0001_CARD_A001_2026-09-12_140300.mhl
Originals: the media source's own history, 7 files
Log: /home/you/.local/state/mediacopy3000/jobs/2026-09-12_140300-1-CARD_A001-offload.log

Section	What it is for
Job, Source, Destination, Folder	Which job, and which folders
Created	When the job was made
Plan	The plan you approved, with its findings, word for word. An offload into a partial destination adds existing copy: resume or replace.
Result	How the job ended
Files, Bytes	The counters from the detail pane
Manifest	Every manifest the job wrote
Originals	What the job checked against
Log	The event log of the job. The page The event log explains it.

A job with failures gets a Failures: section. It has one line for each bad file:

Failures:
FAILED  A001C002_260912_R1AB.mov  hash mismatch expected xxh64 4f9a1c3b2d7e8051 actual xxh64 8c21b40fa9e3d517
FAILED  A001C004_260912_R1AB.mov  io error input/output error
MISSING Sidecar/A001C001.wav

A verify job or a seal job also gets a History: section, with one line for each generation.

Why the plan is in there

The Plan block is the part that makes the report an audit trail. It shows what the application said before you approved it, including every warning you decided to accept. The report and the plan sheet cannot disagree, because they read the same plan.

The report is not the record

The manifest is the record. It lives with the files and outlives this application. The report is a note about one run.